Bit Garden⌗

Deterministic psudo random gate processor. [source]

Each output will mirror CLK according to a decreasing deterministic probability set by the seed value. RST input will reset the psudo random sequence. Short press of the encoder will select a diffent editable parameter on the current page. Long press the encoder to select a different page. The user configurable parameters will be saved to EEPROM and will be recalled the next time you power on the module.

Main page - adjust the pattern length or randomize the seed.

Probability page - configure the probability for each output

Output Mode page - set the output behavior (trigger, gate, flip)

Seed page - manually enter a seed value.

Encoder:
     short press: Toggle between editable parameters on the current page.
     long press: Enter page select mode.

CLK: Provide a gate or trigger for each output to repeat with decreasing
     probability in each output.

RST: Trigger this input to reseed the psudo random sequence.

CV1-6: Gate output with decreasing probability.
Reversed Encoder Direction:

Uncertainty⌗

Configurable stochastic gate processor. [source]

This firmware is based on the Olivia Artz Modular’s Uncertainty. Connect a trigger or gate source to the CLK input and the each output will mirror that signal according to a decreasing probability. Long press the encoder to change trigger modes. Trig will simply echo the trigger or gate received from the CLK input. Flip mode will toggle the output on or off upon each new CLK input.

Encoder:
     short press: Toggle between selecting an output and editing the outputs probability.
     long press: Enter Mode edit menu.

CLK: Provide a gate or trigger for each output to repeat with decreasing
     probability in each output.

CV1-6: Gate output with decreasing probability.
Reversed Encoder Direction:

Time Bandit⌗

Fixed binary clock divider and sub oscillator. [source]

The 6 digital outputs will produce a 50% duty cycle square wave in fixed binary divisions of the incoming CLK signal. This can be used as a typical clock divider or provide sub octaves of the incoming audio rate signal. Each output is one octave lower than the previous.


ENCODER: Select which division to edit. Single press to change the
         selected output. Single press again to leave edit mode.

CLK: Clock input used to produce fixed binary divisions.

RST: Trigger this input to reset the division counter.

CV1-6: Configurable binary clock divisions of 2, 4, 8, 16, 32..8192
Reversed Encoder Direction: